Product Thermal Capacity: 1 - 20 t/h
Working Pressure: 0.7 - 2 Mpa
Available Fuel: Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc.
Available Industries: Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc.
WNS series horizontal internal combustion boiler is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
1. Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
2.Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
3. Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
4. Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
Jan 15, 2019· Boiler in thermal power plant accumulates the steam and build up a pressure to expend it in turbine and convert thermal energy to mechanical energy. The generator which is connected to turbine converts the mechanical energy into electric energy.
The Clean Combustion System Steam Generator has been proven in pilot testing to increase coal power plant efficiency while reducing emission control costs.
Mar 21, 2014· Combustion is the process of igniting and burning a fuel source. As the fuel source burns it releases energy in the form of heat which can then be used to transform water into steam. Combustion is needed to power the boilers. The combustion system of the boiler and how efficiently it works, is at the core of operating an efficient boiler.
Quite often, units and their existing automation are not designed or optimized for these operations which can prematurely wear the boiler and plant equipment from frequent thermal cycling. Working with Emerson, you can enhance boiler operation – optimizing combustion and sootblowing while also improving steam temperature control.
Fluidized bed boilers. ANDRITZ designs and delivers boilers using a range of fluidized bed technologies. These boilers are distinguished by capacity, fuel, and application: PowerFluid Circulating Fluidized Bed (CFB) boilers are used for steam and power generation from conventional fuels, biomass and biogenous residues, sludge, rejects, and waste with high calorific value (such a Refuse-Derived …
The steam generated by the boiler is used in various Industries for processing, heating and for running steam turbines in power plants. The steam produced may be supplied: To an external combustion engine, i.e. steam engines and turbines, At low pressure for industrial process work in cotton mills, sugar factories, breweries, etc., and
Sep 12, 2017· basic boiler operation,boiler operation,boiler operation and maintenance training,boiler operation engineering,boiler operation in power plant,boiler operati
1. POWER PLANT STEAM GENERATION 1.1 STEAM GENERATORS (BOILERS). For collateral reading and further detailed information, see (1) Steam Generation and Use, by Babcock & Wilcox, 1978 and (2) Combustion/Fossil Power Systems, by Combustion Engineering, Inc, 1981. 1.2 STEAM PRESSURES AND TEMPERATURES 1.2.1 RATED PRESSURE AND TEMPERATURE.
As today’s #1 steam and coal power franchise, GE’s Steam Power has installed 30% of the world’s steam turbine capacity, 50% of the world’s steam turbines for nuclear power plants, 30% of the world’s boilers, and has provided 1,500 steam turbine module retrofits.
A boiler or steam generator is a device used to create steam by applying heat energy to water. Although the definitions are somewhat flexible, it can be said that older steam generators were commonly termed boilers and worked at low to medium pressure but, at pressures above this, it is more usual to speak of a steam generator. A boiler or steam generator is used wherever a source of steam …
May 19, 2020· Dedicated to power plants, power generation, supercritical, and heating plants as well as steam boilers, steam turbine generators, gas turbines or combustion turbines, hrsg, steam heating, pressure vessels, steam line, including ASME questions and more. Remember the forum is made up of volunteers from experts to beginners.
No. 76, Xin Da Road, Zhou tie Town, Yixing, Wuxi, China
0086-510-68530066, +86-13506151292Get Latest Price
Copyright © 2020.Zhongzheng Boiler Co., ltd. All rights reserved.