Product Thermal Capacity: 1 - 20 t/h
Working Pressure: 0.7 - 2 Mpa
Available Fuel: Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc.
Available Industries: Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc.
WNS series horizontal internal combustion boiler is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
1. Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
2.Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
3. Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
4. Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
Author: Akanksha Bhourase, Keyur Solanki, Jalpa Shah, Nishith Bhatt Equip your home with 117,000 BTU to 131,000 Equip your home with 117,000 BTU to 131,000 BTUs of heating power per hour using this 3.2 Gal. Oil Boiler that is ideal for heating large spaces up to 3,000 sq. ft. ENERGY STAR qualification and an 86% Annual Fuel Utilization Efficiency helps ensure energy-efficient heating. The boiler is CSA listed
Liquid fuels like furnace oil are predominantly used in industrial application. Viscosity is the most important characteristic in the storage and use of fuel oil. Viscosity influences the degree of pre-heat required for handling, storage and satisfactory atomization. If the oil is too viscous, it may become difficult to pump to light the burner
Our electric fuel oil heaters (preheaters) can be provided in a flange or screw plug design. Thermostats are provided with or without interlocks. Our fuel oil heaters use interlocks to prevent the oil pump from pumping cold, thick oil into the furnace until the oil has been preheated to the required temperature.
Air Preheater Function: Air preheater pre-heats (increases the temperature) the air supply to the furnace with the help of hot the gases. Air Preheaters are heat exchanger to preheat or air heating of the combustion air by means of flue gas, steam, water or thermal oil.
The oil preheater module preheats the pumpable heavy fuel oil to the atomiser temperature for the respective burner. Construction A cylindrical heat exchanger supplied preassembled together with fittings on a sturdy support structure to form a single compact unit.
Oil Preheaters/ Outflow Heaters/ Oil Filters. OIL PREHEATERS. OIL PREHEATER are used to preheat the fuel oil to the required firing temperature about 100 degree C for furnace oil having Redwood viscosity 1500 scs at 100 degree F. In some cases they are used as “booster heater” to bring the temperature of oil to firing level which was earlier cooled down due to pipeline losses.
Oil boilers are perfect for homes that do not have access to natural gas and can lead to huge savings by using renewable fuels. eComfort offers a comprehensive assortment of conventional & high efficiency oil boilers, along with the parts necessary for fixing or upgrading your current model.
Boiler Brands We Service. and waste water recovery. including industrial and commercial heat exchangers & preheaters, cast iron boilers, fire tube boilers & water tube boiler systems. and offer lines of well designed, energy-efficient, gas-fired and oil-fired boilers for residential, commercial, industrial and municipal applications
Description: Bisector air preheaters Power boiler applications require highly efficient and reliable air preheaters to ensure optimum boiler performance. An air preheater with a gas sector and one air sector is called a bi-sector design. Gas and oil fired boilers. Heater Type: Air Heater
Air Preheaters (APH) Air Preheaters (APH) is the Shell and tube type Heat Exchangers used for preheating the air which is fed to the boiler or furnaces/kilns for combustion of fuels. Air Pre heater’s primary objective is to extract the waste heat from the flue gases leaving the boiler.
No. 76, Xin Da Road, Zhou tie Town, Yixing, Wuxi, China
0086-510-68530066, +86-13506151292Get Latest Price
Copyright © 2020.Zhongzheng Boiler Co., ltd. All rights reserved.