Product Thermal Capacity: 1 - 20 t/h
Working Pressure: 0.7 - 2 Mpa
Available Fuel: Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc.
Available Industries: Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc.
WNS series horizontal internal combustion boiler is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
1. Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
2.Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
3. Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
4. Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
The pH or alkalinity level maintained in a boiler system depends on many factors, such as sys-tem pressure, system metals, feedwater quality, and type of chemical treatment applied. The corrosion rate of carbon steel at feedwater temperatures approaches a minimum value in the pH range of 9.2-9.6 (see Figure 11-9). It is important to monitor the
4. Describe the different types of boiler fittings and accessories. 5. Identify the automatic controls associated with boilers. 6. Describe the different types of instruments and meters. 7. Describe the procedures associated with boiler water treatment and cleaning. 8. Describe the procedures for cleaning boiler firesides and watersides. 9.
Jan 26, 2018· > Natural water is usually between 6.5 and 7.5 pH. A common recommendation is to maintain boiler water at 8.5 pH.Acidic water is corrosive. Alkalinic water is more prone to scaling.Alkalinity is a measure of the bicarbonate (HCO3), carbonate (CO3
why maintain ph 9 6 to10 5 boiler drum . Ph And Phosphate Concentration In Bfw And Steam Drum. Ph And Phosphate Concentration In Bfw And Steam Drum - posted in Industrial Professionals: Boiler feed water (BFW) pH is to be maintained in the range of 8.0 to 9.5(guidelines) where as in steam drum pH maintaining guidelines is in the range of 9.5 to 11.0.
Why does boiler drum ph maintain from 9.5 to 10.2.. Answer / r.krishnamoothy Generlly aciddic pH of even about 5 will slowly corrode the boilerso alkaline pH is preferred also in power plants where steam turbines are used The aim is to keep the silica as soluble form else SiO2 will get volatilised in high pressure condition of the boiler and
in the boiler 3. Provides a boiler water chemistry that allows for the . efficient production of clean, dry steam. 40. • Maintain condensate pH at 7.8- 8.5 • Condensate leaving …
Oct 13, 2007· Ph And Phosphate Concentration In Bfw And Steam Drum - posted in Industrial Professionals: Boiler feed water (BFW) pH is to be maintained in the range of 8.0 to 9.5(guidelines) where as in steam drum pH maintaining guidelines is in the range of 9.5 to 11.0. Pressure of steam drum is 34 barg. Since dosing of PO4 (Trisodium phosphate is dosing in steam drum) cannot be a controlling …
For new boiler installations, the system is often precleaned prior to service with a high pH boiler chemical cleaner. This procedure is referred to as boiler “boil out”. This chemical is a corrosion inhibited, high alkaline product that is added directly to the boiler water and recirculates.
Aug 17, 2018· Hiii frndz Here We discussion about what will happen if boiler drum level low or high. What action taken during drum level high or low Subscribe - power plant guruji.
Phosphate Dosing Point In High Pressure BoilerMay 22, 2017Dilution Of Phosphate Injection PackageMay 22, 2013Tri Sodium Phospahte Dosing In Steam Drum See more results Oct 20, 2014· re: boiler drum water ph and boiler feed water ph 10/20/2014 10:37 AM Sure the operators could achieve 30 ppm TDS in Boiler drum water, even with the make-up to the system being as high as 2 ppm TDS, as long as sufficient continuous blow-down is maintained to control the cycles of concentration (ratio of makeup to blow-down flow) at 15:1 or less.
No. 76, Xin Da Road, Zhou tie Town, Yixing, Wuxi, China
0086-510-68530066, +86-13506151292Get Latest Price
Copyright © 2020.Zhongzheng Boiler Co., ltd. All rights reserved.